A tried and true two part UV resistant polyester aliphatic commercial urethane in a VOC compliant formulation. Use it as a final protective coat for wear resistance. It's used as a color coat over epoxy to prevent UV attack and as a clear coat over a clear epoxy primer for decorative floors (stained and dyed). Apply at 350 sq ft/gal at 5 mils. Sold in 3/4, 1.5, 3 and 15 gallon kits.

A two part high performance waterborne satin (low gloss) urethane. Use when low odor is required or in cities with very low VOC limits. This product contains less than 25g/l voc.
Sold in 1.5, 3 and 15 gallon kits. Mixes 2 to 1 and covers 320-500 sq ft/gallon.

A two part high performance waterborne high gloss urethane. Use when low odor or in areas with very low VOC limits. This product contains less than 25g/l voc.
Sold in 1.5, 3 and 15 gallon kits. Mixes 2 to 1 and covers 320-500 sq ft/gallon.

A single component 65% solids moisture cure urethane. No need to mix, just pour it out on the floor or in a paint pan and start rolling. It dries extremely hard and retains a very high gloss. High chemical and unbelievable abrasion resistance. Also, the best top coat for tire mark resistance. Those properties make it an excellent topcoat choice. Apply at 240-480 sq ft/gallon at 2-4 mils dry. Sold in 1 and 5 gallon containers.
Clear only, no colors.

An 85% solids two part Polyaspartic Urethane. 260-650 sq ft/gallon at 2-5 mils dry. Do not mix more than you can apply in 15-20 mins. Walkable in about 2-3 hours. Dries hard and with a very high gloss. Solid in 1.5, 3, 15 gallon kits.